- which is The smallest automatic bottle water production line model ?
the small automatic water filling machine model is xgf8-8-3 capacity 2000-3000 bottles/hour .
2. What equipment does the whole bottle water filling machine production line consist of ?
3. What is the function of water filling machine each machine ?
We happen to have a customer who purchased a set of automatic 8-8-3 water production line from us. Now we will introduce the machine functions of the whole production line to you.
A client lived on the edge of a mountain. There was a spring at the foot of the mountain. The spring water contained many minerals that are good for people’s health Strontium, potassium, calcium ions, a lot of people every day, they drive in five gallon vats, they get water, they take it home and they drink it. The client wants to open a bottled mineral water factory near the mountain spring, because it is near the mountain, it is difficult to build a large plant.
Because labor is also very expensive now, the customer wants to purchase a set of minimum automatic bottled water production line.After we talked to the customer According to the size of the customer’s plant, we designed a set of automatic production line for the customer.
1. Water treatment equipment is to treat water into mineral water that can be directly drunk.
Water treatment equipment includes:
- Quartz sand filter
- Activated carbon filter
- Sodium filter
- Hollow filter
- Ultraviolet sterilization
- Ozone sterilization
- The pitcher
Summary: the quality of the customer’s spring water is better, we use PP cotton pre filtration, directly with the hollow filtration. Therefore, different water sources, the need to match the machinery and equipment is generally not the same.
2. Bottle blowing machine: blow the bottle embryos into bottles.
The product the customer needs is 2000-3000BPH, so we equipped the customer with a 3-cavity bottle blowing machine of 2500-3000 bottles/hour.
OK-3000 fully-automatic bottle blowing machine is a linear type bottle blowing machine , which is developed and researched by the most advanced bottom making technology in the current world and molded through blowing PET by high pressure compressed Air .this linear bottle blowing machine can be used independently for blowing botles or completion of bottle blowing before bottle water filling machine.The machine shows characteristics such as high intelligence,stable and reliable mechanical performance, high production efficiency,low cost ,it is widely used for production of liquid food bottles .
3. water filling machine mode xgf8-8-3
fully automatic small water filling machine 2000-3000BPH bottle volume 500ml , bottle washing filling capping machine . Rinse out the dust inside the blown bottle, fill the water into the bottle, and seal the mouth with the cap.
The filling is fast the amount of liquid is accurately controlled and the dropping and leakage are avoided .
The machine has compact structure, complete control system, easy operation and high degree of automation
spring cramps are used in the bottle washing processing . The empty bottles can be turned over 180degree
Along the conveying rail , there are two time of internal and external washing the efficiency of bottle washing is high.
To change bottle shape, the operator only needs to replace the star-wheel, inlet bottle screw and arc guide plate
the filling by spring type liquid lever controlling filling valve , no dripping . The liquid lever is easy to control
All construction made of SUS304, There is no dead corner inside filling valve .The parts contacting media are
made from 304 SUS and have no process blind angles to enable easy cleaning The control system has the function of control producing speed, cap shortage detection, bottle block auto stop and production counting The machine applies a highly effective cap arranging system that has complete self control and protective device The machine is equipped with a complete overload protection device that can secure equipment and the operator effectively , Main electric components and pneumatic components apply world famous brand products .
4. shrink Labeling machine: put the label on the bottle, and then shrink it by heating with steam.
Application: Sleeving the label on the PET bottle, then shrinking it on the bottle by steam.
- Host machine; AC220V, 50/60HZ, (1.5-2KW, single-phase)
- Shrinking machine: AC380V, 50/60HZ,14KW(steam heat ) / three phase
- Production speed:2000-3000BPH The standard length of label is 100mm and the speed can be adjusted accord to customer’s requirements.
- Diameter of bottle body : ∮28mm-∮125mm
- Length of label: 30mm-250mm
- Thickness of label: 0.035mm-013mm
- Material of label：PVC、 PET、 OPS
- Dimension:L2000W850H2000mm
5. Blow dryer: blow off the water droplets left by the blowing steam on the bottle,
in order to prepare for the next step of laser coding .
Application: Blow away the water from the bottles.
No water on bottle is for next label machine .
Model: BD-01
Capacity: 2000-3000BPH
Material: SUS 304
Dimension: 850X500X1400 mm
Weight: 160Kg
Voltage: 380V 50HZ 3P / 220V 60HZ 3P
Power: 5.5KW
6. Laser Coding Machine: Engrave the production date on the bottle body or cap with laser.
The laser printer works very fast and can continuously mark products moving on the assembly line. machine uses a high-energy fiber laser to ablate the metal surface and control the movement of the laser head through CNC to print the metal surface with the required pattern. low price in the industry . In addition, in order to make customers feel at ease about the quality and working ability of the machine.
7. Film Packing Machine: The bottles are wrapped with film, usually 12 bottles or 24 bottles in a pack.
1) Technical parameter：
● facility type：OK-150A type
● facility external size：L5050×W3300×H2100mm
● wrappage max size：L600×W400×H350mm
● shrinkage film size：PE、PVC、POF
● shrinkage thickness：0.03-0.15mm
● the shrinkage tunnel temperature: 160 – 260°can adjust at will.
● max output per hour：600-700bag
● facility power：18Kw
● actual power：15Kw/hr
● pressure requirement：380/220V
● facility weight：1.2T
● fan machine：2set 380V/1.1Kw ， 4set 380V/65W
Summary: now the customer has started production, the customer’s business is very good, and the customer often participates in a variety of high quality healthy water exhibition in the world.
We are very happy to see that the customer has such a good product, there is such a good business, here also wishes our customer AMR business is getting better and better.
A. small water filling machine video
B.What is the price of small water bottle filling machine price ? How much is a small automatic filling machine?
if you need A to Z Total price about $52,500 – $59,500 . Different brand part in machine price also have low and high price , this price just as a reference .
C. How much space is needed for the entire small water bottle filling machine ?
In general, 10M by 20M space is enough.
D. How much power is needed for the entire bottle water filling machine production line ?
this whole bottle water filling machine needs about 100KW.
